Welcome To Wanyu Bearing Co., Ltd.~~




Industry news
  • Bearings are highly valued in China!


    Bearing is an important machine accessory in modern industrial machinery. The main function of the bearing is to support the rotating body of the machine and ensure the accuracy of the rotating body of the machine in rotation. According to the classification of bearings, it is divided into rolling bearings and plain bearings. Among them, rolling bearings have become more standardized and serialized. As far as the shape of rolling bearings is concerned, rolling bearings can be subdivided into bal

  • Methods for regularly maintaining bearings to improve accuracy


    Apply a little bit of smoothing agent and rub it between your two fingers. If there is any contamination, you can feel it; or apply a thin layer of smoothing agent on the back of your hand, and then stop the light seal inspection.If a bad condition is shown, it must be replaced. A bad oil seal will cause damage to the bearing, which will cause the bearing to become abnormal and cause equipment to stop. So before we stop checking the bearing, we should clean the bearing's appearance first, an

  • Method for judging the viscosity of bearing lubricating oil


    The main technical index of the viscosity of bearing lubricants, but the viscosity of bearing lubricants must not exceed the degree of influence of engine startup. The vast majority of oil is based on its viscosity sub-brand bearings. . Viscosity measurement methods are divided into two categories of viscosity and relative viscosity. Viscosity is divided into two types: dynamic viscosity and kinematic viscosity; Engler viscosity, relative viscosity, Saibert viscosity and viscosity are representa

  • Troubleshooting analysis of anti-friction thrust ball bearings Wanyu tells you


    1. Model differences With the advent of internationalization, domestically produced thrust ball bearing codes are gradually in line with thrust ball bearing codes. The latest published national standards show that domestically produced codes are basically consistent with international ISO standards.At this time, if the thrust ball bearing is migrated and transformed in oil, the rolling surface will be damaged due to foreign matter and so on.Wear failure is one of the common failure modes of vari

  • What are the differences between tapered roller bearings and needle roller bearings?


    Cylindrical roller bearings belong to precision bearings. The rib guide of the precision sorted roller post shaft ring is composed of a cage, a roller and a guide shaft ring. It can be separated from another bearing ring and belongs to a separable bearing. This type of bearing is easy to install and disassemble, especially when the inner and outer rings are required to have an interference fit with the shaft and housing. This type of bearing is generally used only for live ammunition with radial


service hours:Monday to Sunday(9:00-18:00)


contact hotline:+86 15969613555

address:Yandian Industry Park,Linqing City,Shandong Province

Bearing Providers Helping Quality Companies

Copyright  2020-2021, Shandong Wanyu Bearing Co., Ltd. All rights reserved